Sony RD-XS35SC - Manual (Page 37)

37
Introduction
Connections
Basic setup
Press / to select, then press ENTER.
If your answer is “Yes”, and:
• if you selected “TUNER” at step 6,
you will go to step 13.
• if you selected “Line 1” at step 6,
you will go to step 12.
12
Antenna connection
Press / to select, then press ENTER.
13
Confirmation
Press / to select, then press ENTER.
(Continued)
The TV Guide On Screen system needs to locate the correct code for yourcable box
brand in order to work properly.
Is your cable box now tuned to channel 09?
STEP 2: Configuring for Cable
Yes
No
Test the code again
To supply your DVD Recorder with correct program listings, the TV Guide On Screen
system needs to know if you have attached an antenna to your DVD Recorder to
receive over-the-air stations.
Do you have an antenna connected to your DVD Recorder?
STEP 3: Configuring for Antenna
Yes
No
ENTER
ENTER
You have entered the following TV Guide On Screen system settings. If any setting
is marked INCOMPLETE, you will not be able to use the feature until you complete
that portion of TV Guide On Screen system setup.
ZIP code - 46001 (USA)
Cable Box on input “TUNER” Ch. 3
Cable Box selected: code 036 (Toshiba)
Are the above settings correct?
STEP 4: Confirming Your Settings
Yes, end setup
No, repeat setup process
ENTER
RD-XS35SU/SC_Inst_E_p29-43 06.2.13, 4:33 PM 37