Samsung VP-D190MSI - Manual (Page 62)

ENGLISH
Advanced Recording
Audio dubbing
✤ The AUDIO DUBBING function only works in VCR Mode.
✤ You can add sound to the original sound on a pre-recorded tape, recorded in SP mode with 12bit sound.
✤ Use the internal and external microphones or other audio equipment.
✤ The original sound will not be erased.
Dubbing Sound
1. Set the camcorder to VCR mode.
■ If you want to use an external microphone, connect the microphone to
the external MIC input jack on the camcorder.
■ When you wish to dub using the External A/V input, connect the AUDIO
/VIDEO cable to the camcorder by inserting the cable jack into the A/V in/out
terminal on the left side of the camcorder.
2. Press the (PLAY/STILL) button and find the time frame of the scene to
be dubbed.
3. Press the (PLAY/STILL) button to pause the scene.
4. Press the A.DUB button on the Remote Control.
■ A.DUB will be displayed on the LCD.
■ The camcorder is in a ready-to-dub state.
5. Press the (PLAY/STILL) button to start dubbing.
■ Press the (STOP) button to stop the dubbing.
Notes
■ You can not use the audio dubbing function while playing a write protected video tape.
■ When you wish to dub using the External A/V input, you must connect the AUDIO/VIDEO cable to the audio
system from which you wish to record.
■ You can not use the audio dubbing function while the A/V calbe is connected to TV.
■ You can not dub sound on a pre-recorded tape in LP mode or 16 bit mode.
62
SAMSUNG SAMSUNG SAMSUNG SAMSUNG AV IN/OUT
DY
USB
MIC
REV
S.SHOW
FWD
START/ STOP
SELF TIMER
X2
A.DUB ZERO MEMORY
WIDE
TELE
STILL
PHOTO DISPLAY