Displaying the break timer, Displaying and setting the break timer – Sharp Notevision PG-C45S User Manual
Page 63
Easy to Use Functions
-59
Displaying the Break Timer
"On-screen Display
Displaying and Setting
the Break Timer
1
Press
. The break timer
starts to count down from 5
minutes.
2
When “
” is displayed, press
'
'
'
'
' , "
"
"
"
" , \
\
\
\
\ or |
|
|
|
| to set the break
timer.
• You can set anywhere between 1 and
60 minutes (in 1 minute units).
• The break timer starts to count down
as soon as ' , " , \ or | is pressed.
3
Press
to cancel the break
timer.
Note
• Auto Power Off will be temporarily dis-
abled during the break timer.
When no input signal is detected for more
than 15 minutes, the projector will auto-
matically shut off if the break timer has
elapsed.
• The break timer will be displayed on the
startup image. To change the screen dis-
played during the break timer, change the
setting of “Startup Image” (see page
BREAK TIMER
button
This function can be used to show the remaining time for break during meeting.
'
,
"
,
\
,
|
buttons