Sony PCV-E518DS - Manual (Page 12)

VAIO Digital Studio Computer Read Me First 12
❑ Change the timer settings for Standby mode in the Control Panel, as
follows:
1
From the Start menu, point to Settings and click Control Panel.
2
Click the Power Management icon.
3
On the Power Schemes tab, change the Power scheme to Home/
Office Desk.
4
In the list box for System standby, select an interval of time.
5 Click the OK button and close the Control Panel.
To Resume from Standby Mode
There are two ways to resume system functionality when your computer
is in Standby mode. Use either of the following methods.
❑ Press any key on your keyboard, such as the Enter key.
❑ Touch the power switch on the front panel.
It may take up to 30 seconds for your system to recover stored
information and resume functionality. The screen remains blank while the
system is resuming functionality.
Applications That Use the TWAIN Driver
Digital imaging applications, such as Adobe PhotoDeluxe
®
, allow you to
transfer images to your computer from external devices, including
scanners or digital cameras. For some devices, a TWAIN driver window
appears on the screen. Always close the TWAIN driver window before
exiting or minimizing a digital imaging application.
Restoring Outlook 98
For the Add New Components functionality to be available with
Microsoft Outlook, you must first run the installation program for
Outlook from the Application Recovery CD. When prompted to install
the program, select Exit. This decompresses the software, making the
Add New Components functionality available.
Inserting Add-in Boards
Your VAIO Digital Studio™ Computer accommodates PCI add-in boards
up to 7.7 inches in length.