Samsung VM-A680 - Manual (Page 154)

Section 3B: PCS Vision 146
5. Compose your message using the keypad and press for
Next when finished.
6. Press to Send.
Accessing SMS Text Messages
There are two options associated with SMS Text messages that are
used to configure how the message is displayed or not displayed.
These options are:
Ⅲ
Message and Icon - Displays the message icon and a pop-up
of the message on-screen.
Ⅲ Icon Only - Displays only the message icon on-screen.
To read an SMS Text message:
1. Depending on the setting, the message will be displayed on-
screen. If not, then you must access the message through the
Messaging menu.
2. If there is a URL in the text body, left soft key will display
"Reply". "Go" will appear in the sub menu.
3. Scroll to the new short mail message and press . (Unread
short mail messages will be marked with an asterisk [
*
].)
To reply to an SMS Text message:
1. While the message is open, scroll down to the end of the
message, highlight the Reply or Reply All option, and press
.
2. Compose your reply
Ⅲ To type a reply, highlight the Message box and use your
keypad to type a message. Use the right softkey to select a
character input mode.
3. Review your reply and press to Send.
Note: You can also check the Urgent option to send the message with an
urgent status.
Note: The PCS Phone Number of the person who sent you a text message is
displayed before the message text. If the sender is on your short list,
their nickname will appear instead of their number.