Socket Mobile CompactFlash/SDIO Connection Kit with Bluetooth Wireless Technology - Manual (Page 21)

CHAPTER 2: BASIC SETUP | 21
7. In the next screen, enter the User name and Password. Tap on the
Advanced button.
8. In the General screen, enter the following settings:
• Baud rate: 115200
• Wait for dial tone before dialing: Unchecked
9. If your network uses DHCP, tap ok. In the last screen, tap Finish.
If you need to enter IP addresses, tap on the TCP/IP and Servers tabs to
enter the necessary settings. Tap ok. In the last screen, tap Finish.
Now you have finished creating a connection and are ready to dial up to
your network. Socket recommends using either of two methods for dialing
in and connecting to your network.
Uncheck