Gearshift lever -2 – Suzuki Grand Vitara 99011-66J22-03E User Manual

Page 133

Advertising
background image

5-2

OTHER CONTROLS AND EQUIPMENT

66J22-03E

Clutch Pedal (1)

(For manual transmission)
The clutch pedal is used to disengage the
drive to the wheels when starting the
engine, stopping or shifting the gearshift
lever or transfer lever. Depressing the
pedal disengages the clutch.

Brake Pedal (2)

Your SUZUKI vehicle is equipped with
front disc brakes and rear drum brakes.
Depressing the brake pedal applies both
sets of brakes.

You may hear occasional brake squeal
when you apply the brakes. This is a nor-
mal condition caused by environmental
factors such as cold, wet, snow, etc.

Accelerator Pedal (3)

This pedal controls the speed of the
engine. Depressing the accelerator pedal
increases power output and speed.

Gearshift Lever

Manual transmission

65D449

5-speed automatic transmission

66J046

CAUTION

Do not drive with your foot resting on
the clutch pedal. It could result in
excessive clutch wear or clutch dam-
age.

WARNING

If brake squeal is excessive and
occurs each time the brakes are
applied, you should have the brakes
checked by your SUZUKI dealer.

WARNING

Do not “ride” the brakes by applying
them continuously or resting your
foot on the pedal. This will result in
overheating of the brakes which
could cause unpredictable braking
action, longer stopping distances or
permanent brake damage.

Pedals: 6
Gearshift Lever: 10

Advertising