Sharp 36C530 - Manual (Page 7)

7
Dimension: 140mm x 215mm
Quick Reference Control Operation
• Part Names
Front Panel
Quick Reference Control Operation
Note:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the
remote control, place it under a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
Basic Remote Control Functions
CHANNEL UP/DOWN
(
8 ) Selects next higher
channel.
( 9 ) Selects next lower
channel.
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
POWER
Press
→ On.
Press again → Off.
SENSOR AREA FOR
REMOTE CONTROL
MENU
Press
→ Accesses MAIN MENU.
Press again → Exits MAIN MENU.
1 2 3
4 5 6
7 8 9
0 100
POWER
TV
MENU MUTE
PAUSE
FLASHBACK
DISPLAY INPUT
TV • CATV • VCR • DVD
STOP REC
REW PLAY FF
CH/SKIP
VOL
—
CH
CH
VOL
+
ENTER
A B C D
PERSONAL PREFERENCE
DVD
VCR
CATV TV
DVD VCR
POWER
Press
→ On.
Press again → Off.
REMOTE KEYPAD
Accesses any channel from keypad.
FLASHBACK
Returns to previous channel.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite
programs by using the 4 categories A,
B, C and D. The channels can be
accessed quickly by using these
buttons. (See page 32.)
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects
the TV adjustments.
MENU
Press
→ Accesses MAIN MENU.
Press again → Exits MAIN MENU.
CATV/DVD-TV/VCR MODE
SELECT SWITCH
In TV/VCR position, sends power and
channel select commands (Channel
up/down and Random Access buttons)
to the TV and VCR control.
In CATV/DVD position, sends power
and channel select commands to a
cable TV converter and DVD control.
DVD/VCR CONTROL
See page 41.
Infrared Transmitter Window
DISPLAY
Press
→ Displays receiving channel for
four seconds.
Press again
→ Removes display.
• Temporarily displays receiving
channel when in Closed Caption
mode.
INPUT
Press
→ Switch to external video
INPUT 1 mode.
Press 2 times
→ Switch to external video
INPUT 2 mode.
Press 3 times
→ Switch to external video
INPUT 3 mode or COMPONENT mode.
Press 4 times
→ Switch back to the
original TV mode.
See page 39.
ENTER
Used in some instances where a Cable
Converter Box requires an “enter”
command after selecting channels,
when using the REMOTE KEYPAD
button. (See page 41)
CHANNEL UP/DOWN
(
8 ) Selects next higher channel.
( 9 ) Selects next lower channel.
• See pages 28 ~ 30 for channel
presetting.
• Moves the “ [ ” mark of the MENU
screens.
MUTE
Press
→ Mutes sound.
Press again → Restores sound.
• CLOSED CAPTION appears when
sound is muted.
VIDEO/AUDIO
TERMINALS
INSIDE DOOR
IN 2
32C530(07) 2/18/03, 4:39 PM 7