Savin MLP26 - Manual (Page 37)

Paper and Other Media Supported by This Printer
29
3
•
❍
Means that the size is supported but the paper size should be set with the con-
trol panel. There is no dial on the tray.
See p.40 “Loading Paper in the Bypass Tray”
See p.47 “Loading envelopes into the Envelope Feeder Unit”
•
✩
Means that the size is supported and indicated on the tray dial. Be sure to set
the paper size dial to match the actual paper size loaded in the tray.
•
★
Means that the size is supported but not indicated on the tray dial. You
should set the tray dial to “
p”, and select the paper size with the control pan-
el.
•
❍*
Means that the supported size is approximately 3.55 - 12.00 inches in width,
and approximately 5.83 - 17.00 inches in length. The supported size may dif-
fer depending on the printer language you use. Use the printer driver to set
custom sizes. Set custom sizes with the control panel.
•
★**
Means that the supported size is approximately 7.16 - 11.7 inches in width,
and approximately 5.8 - 17 inches in length. The supported size may differ de-
pending on the printer language you use. Use the printer driver to set custom
sizes. Set custom sizes with the control panel.
• X
means that the size is not supported.
❖ ❖ ❖ ❖ Paper weight and number of sheets to be set
*1 Confirm that the top of the stack is not higher than the limit mark indicated on the
side fence of the tray.
*2 The Envelope Feeder Unit requires the installation of the optional Paper Feed Unit.
Supported paper weight
Maximum number of
sheets (plain paper)
*1
Paper Tray 60 - 105 g/m 2
(16 - 28 lb. bond)
250 (80 g/m 2 , 20 lb. bond)
Paper Feed Unit Type 2600 (option) 60 - 105 g/m 2
(16 - 28 lb. bond)
500 (80 g/m 2 , 20 lb. bond)
Bypass Tray 52 - 162 g/m 2
(14 - 43 lb. bond)
100 (80 g/m 2 , 20 lb. bond)
For other kind of papers,
see p.33 “Types of Paper
and Other Media”.
Envelope Feeder Type 2600 *2 p.33 “Types of Paper and Other Media”.