Sekonic L-758DR - Manual (Page 15)

-9-
8. Jog Wheel Lock or Lock Off
1. Hold down the Mode button
and ISO1 button
and “LOC” will appear to indicate that the Jog Wheel is
locked. The last measurement is held until the lock is
released, even if the Jog wheel
is accidentally
moved.
However, if the measurement button is pressed, a
new measurement is displayed with the same locked
settings.
2. To release the Jog Wheel lock, perform the same op-
eration for the Jog Wheel lock, Hold down the Mode
set button and ISO1 button and “Off” will appear to
indicate that the Jog Wheel lock is released.
Reference:
• If power of the meter is turned off or auto off is activated when in the Jog Wheel locked position,
the lock function will continue operating when the meter is turned on again.
3. Before Using