Lcd transmitter battery replacement – ScyTek Electronics 5100RS-22W User Manual

Page 9

Advertising
background image

Galaxy 5100RS-2W - Page 5

4. Turn off the ignition key.
5. Repeat steps 1-4 to add an additional 2-way transmitter.

LCD Transmitter Battery Replacement

Your Galaxy Remote Transmitter uses a 1.5 volt AAA alkaline battery, which will require

replacement in time. Depending on the amount of use, the battery may last up to six months

before it needs replacement. When the battery needs replacing, the system’s operating range

will decrease, the LCD display will show only one of three bars in the battery icon, or the

display and sounds may suddenly stop and start as the battery voltage drops below minimum.

In order to change the battery, first slide the battery door locking pin to the side. Carefully

slide the battery cover downward until it is free. While replacing the battery make sure that

the positive and negative terminals are positioned correctly, then carefully reassemble the

transmitter case.

Advertising