Sound Performance Lab 2595 - Manual (Page 25)

Passeq
Power Supply
The power supply was carefully engineered to provide clean and consistent currenttttan
important prerequisite for excellent audio. Built around a toroidal transformer, the power
supply generates a minimal electromagnetic field with no hum or mechanical noise. The
output side is filtered by an RC circuit to extract noise and hums inherent in commercial AC
power.
All audio-related components are fed by two separate voltage regulators to minimize distur-
bance from other components.
An AC power cord is included for connection to the standard 3-prong IEC connector. The trans-
former, power cord and IEC connector are VDE, UL and CSA approved. The AC fuse is rated at
500 mA (230 V version) or 1 A (115 V version).
Inputs and Outputs
Instrumentational amplifier, transformer balanced
Nominal Input Level +4 dBu
Input Impedance =22 kOhm
Output Impedance ‹ 600 Ohm
Max. Input Level +28 dBu
Max. Output Level +32 dBu
Measurements
Frequency Range
20 Hz-50 kHz linear, 50 kHz-100 kHz: -3 dB
CMRR › 70 dBu (@ 1 kHz)
THD & N (@ 0 dBu Input Level) › -110 dBu
S/N A-weighted -115 dBu
Crosstalk L/R (@ 1 kHz) › -85 dBu
Dynamic Range 143 dB
Power Supply
Toroidal Transformer
48 VA
Fuses 500 mA/230 V, 1 A/115 V
Voltage Selector 230/50 Hz ‹› 115 V/60 Hz
Power Consumption 40 W
Dimensions
Standard EIA 19 Inch Housing/4U
482 x 176 x 390 mm /ca. 19 x 7 x 15.6 inches
Weight 11,8 kg /25.96 lb
Notes:
0 dBu = 0,775 V
Subject to change without notice.
"$
.BJOT
*OQVU
"$
.BJOT
*OQVU
Specifications
25