2 quick video export through front panel – Speco Technologies DVR-16TS User Manual
Page 43
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/08
42
Data Type
This item is used to select export video type. The options are <Normal>
(export normal video only), <Event> (export event video only) and <Both>
(export both normal and event video).
NOTE:
If you want to export event video only, then set the “From”
and “To” items at the same date and time. Otherwise, not only the
event video but also the normal video included between the “From”
date/ time and “To” date/time will be exported.
The *.drv file can only be played back with SpecoRemote™ and
SpecoPlayer
TM
and multiple camera video can be played from one file. Note
that if multiple channels are exported, each channel is exported to a separate
file.
4.4.1.3
Digital Signature
The user can export a video clip with or without a digital signature. Set the
item to <YES> to export with the signature file, or <NO> to export without the
signature file.
Each recorded video with a digital signature will be exported automatically into
four files, including *.gpg, *.drv, *.sig and readme txt. The *.gpg file name is
the same as the last eight MAC (Media Access Control) address digits of the
unit.
Make sure that you have an external storage device, such as a USB Hard
Drive or USB ThumbDrive
®
, available and connected to the appropriate port
for export.
For more information about verifying a digital signature, see
Appendix E:
Verifying Digital Signature
.
4.4.1.4
Erase Disc
This function is used to remove information found on a CD-RW or DVD+RW
disk prior to exporting new information to the drive. Select <YES> and press
ENTER to start deleting data.
4.4.2
Quick Video Export through Front Panel
The unit provides a quick way to export video files to the built-in CD-RW or an
external device, such as a USB thumb Drive, and save the video to *.drv file.