SoniqCast AireoTM - Manual (Page 58)

Aireo User Guide
4. Select Add PC and press the Play/Select button. Aireo automatically starts
Scanning for Networks.
5. Select the network associated with your SoniqSync Host (Host PC) and click the
Play/Select button.
• Aireo connects to the network by obtaining an IP address from a DHCP
server.
• A “Network connection failed” message appears if Aireo cannot connect
to the network.
• Once connected, Aireo locates the host PCs available on the network with
active SoniqSync applications.
6. Select the SoniqSync Host you want to connect to from the list and press the
Play/Select button.
• If the connection to the PC Host is new, the following message appears on
the screen:
Complete Installation on PC
Go to the host PC and add your Aireo player by clicking the YES button
on the SoniqSync – Install Player dialog. (See the SoniqSync™ Online
Help for more information.)
• If the association is already established, Aireo display the following
message:
Addition Complete
• If the host PC cannot be reached (for example, lost connection), Aireo
display the following message:
Connection Failed
Note: You may cancel the Add PC process at any time. If cancelled, Aireo
displays an Aborting Installation message and returns to the Setup PC view.
Deleting a PC
You can remove a host PC association from your Aireo player:
1. From your Aireo player, press the Mode button until you see SoniqSync on
the display screen and release the MODE button.
2. Select SETUP and press the Play/Select button.
3. Select PC Setup and press the Play/Select button.
4. Select Delete PC and press the Play/Select button.
5. Highlight the host PC association you want to delete and press the Play/Select
button.
6. Use the < RIGHT or LEFT > buttons to change confirm the request:
• YES – Indicates Aireo will delete the host PC association.
52