Advanced connection: connecting your ir blaster – Sony SAT-W60 User Manual
Page 14
Advertising
Digital Satellite Receiver/Recorder
14
Advanced Connection: Connecting Your IR
Blaster
1
/
2
"
to 1
"
Digital Satellite Receiver/Recorder
VCR (front)
IR Sensor
In front of the VCR
Place the IR Blaster under and
in front of the VCR.
The IR Blaster must extend just
in front of the infrared sensor
of the VCR.
1
2
2
1
To allow the Digital Satellite
Receiver/Recorder to control
your VCR
Connect the IR Blaster to the VCR
CONTROLLER jack on the
receiver/recorder.
z
Tip
If the infrared sensor is not
marked on your VCR, shine a
flashlight into the front panel of
the VCR to locate the sensor.
01USBook.BOOK Page 14 Wednesday, July 5, 2000 12:24 PM
Advertising