Stabila HL-100 - Manual (Page 8)

Output:
7. Technical data
Adjustment range:
Plumb:
Batteries:
Operating life:
Operating temperature range:
< 5 mW, Laser Class IIIa
This product complies with the applicable
requirements of 21CFR parts 1040.10 and
1040.11.
approx. ± 3°
± 1 mm/m or ± 1 /
8”
over 10 ft
2 x 1,5 V alkaline cell, size AA, LR6
Approx. 48 hours
0°C to +50°C or 32°F to +122°F
Subject to technical modifications.
-20 °C to +60 °C or -4°F to +140°F Storage temperature range:
8. Guarantee terms and conditions
Stabila provides a guarantee against defects in material and workmanship
for a period of 12 months from date of purchase. Manufactoring defects will
be eliminated at Stabila's own discretion either by repairing or replacing the
unit. Stabila accepts no other claims.
No liability is accepted for any faults due to inappropriate treatment (e.g.
damage caused by the unit falling, operation with the wrong voltage or type
of current, use of unsuitable current supply sources) or for any changes made
to the unit by the purchaser or a third party.
Also no claims under guarantee are accepted for natural wear and tear or any
small faults that do not significantly affect the unit's operation.
Any guarantee claims must be made via the dealer. The guarantee form
needs to be filled out if the unit is to be returned.
Laser type: Red diode laser, wavelength 650 nm
Up-right position: ± 0,5 mm/m or ± 1 /
16”
over 10 ft
All moving parts are subject to wear and can be ordered seperately as
spare parts:
(5): Small yellow locking nut
(6): Large black locking nut
(7): Adapter plate
(13): threaded tube
9. Spare parts
Accuracy:
Over head position: ± 0,7 mm/m or ± 3 /
32”
over 10 ft
Order No 08 510
Order No 08 520
Order No 08 530
Order No 08 540
8