Samsung DVD-HR720/ - Manual (Page 149)

TV Guide
English - 149
• Change the service type if you are able to
switch the source of the channel (e.g., cable,
cable box, over-the-air, antenna, etc.)
• Change the tune channel number using your
remote control.
• Enter a position number in the number entry
box
- The position number determines where in
Listings the channel displays
- That number can range from 1 (top position)
to the total number of channels in Listings
2 Press ENTER to display the CHANNEL EDITOR
screen.
3 When finished, press ENTER to highlight Done.
Press ENTER again to close the menu and accept
the changes.
Screen 2
Press the INFO button to display a Help
screen. Press the INFO button again to
close the screen.
NOTE
If you do not wish to save the changes:
Highlight Go Back to Setup and press ENTER
to close the menu, change no information, and
return to the Setup Service Bar.
Highlight Cancel and press ENTER to close the
menu, change no information, and return to the
highlighted channel.
or
NOTE
DVD-HR720_XAA_TV GUIDE127~167 2005.9.28 11:50 AM Page 149