StarTech.com PCI EXPRESS PEXSATA24E - Manual (Page 5)

Instruction Manual
2
HHaarrddw waarree GGuuiiddee
Please Note: There are six SATA ports available on PEXSATA24E, 4 internally and 2
eSATA connectors externally. Based on the images above, the respective ports have
been named A through F. Ports A to D are internal SATA ports, while ports E and F are
external SATA ports. By changing the jumper setting on PEXSATA24E circuit board, you
will be able to utilize four of the ports simultaneously. Please designate which ports you
wish to use, by adjusting jumper settings according to the chart below. By default, Port
A, B, C and D are working.
G (Jumper Settings)
JP Description Active Port
J2-J5
1-2 close Enable SATA Connector D
2-3 close Enable SATA Connector E
J6-J9
1-2 close Enable SATA Connector C
2-3 close Enable SATA Connector F
A C
F
E
B D
G