Swann 8 Channel DVR H.264 - Manual (Page 19)

17
Main Menu: Opens the Main Menu of the DVR. See
page 18.
PTZ: Opens the Pan, Tilt, Zoom controls. The same
function can be accessed by pressing the PTZ
button on the remote control.
Multi-pics: Select from all available viewing modes,
and which channels you’d like to display. You can
access the same options by using the viewing modes
select button.
Left: The Multi-pics options. Ch01-04
and Ch05-08 will display 2 x 2 (quad)
screen images of the selected channel.
Ch01-08 will display all eight channels
simultaneously (3 x 3, with one blank
frame).
PIP (Picture In Picture): Accesses a list of available PIP modes. You can also access
and cycle through these modes using the PIP button on the remote control.
Rec Search: Opens the Record (Video) Search menu, as detailed on “Record (Video) Search”
on page 33.
Mute On/Off: Turns the audio on or off.
Manual Rec: Instantly engages manual recording.
Start Rotate: Initiates the automatic display rotation. Channels will be displayed
sequentially on an automatic loop. To set the rotate time, see page “Video / Audio
Setup Menu” on page 56. If Rotate has already been turned on, then this option
will change to Stop Rotate, which will disable the rotate function.
Start Cruise: This will initiate the cruise mode for PTZ devices. You’ll need to have
configured your PTZ device using the PTZ Configuration menu (page 46) and then
programmed a series of preset points (see “Setting up Cruise Mode” on page 61)
to use as a series of cruise movements.
Lock (only appears once a password has been set - see “User Setup Menu” on
page 54): Locks the DVR’s user interface. Unlocking the DVR requires a correct
username and password combination.