Sony WEGA KLV30XBR900 - Manual (Page 19)

17
Setup
Media receiver unit
Front Panel
Item Description
1 Main POWER Press to turn on and off the main power of the TV Set.
2 POWER LED Lights up in green when the TV set is turned on. The LED
lights up in red when in standby mode. The LED does not
light up when the main power is turned off. If the LED
blinks continuously, this may indicate the Media receiver
unit needs servicing (see “Contacting Sony” on page 96).
3 ON/OFF TIMER
LED When lit, indicates one of the timers is set. When the timer
is set, this LED will remain lit even if the TV set is turned
off. For details, see page 89.
4 MEMORY
STICK Memory Stick insertion slot. For details, see “Inserting and
Removing a Memory Stick” on page 70.
5 MEMORY
STICK ACCESS
LED When lit, indicates that the Memory Stick is being read.
(Do not remove the Memory Stick when the indicator is lit.)
6 INPUT SELECT Press repeatedly to cycle through the video equipment
connected to the Media receiver unit’s video inputs.
7 MTS/SAP Press repeatedly to cycle through the Multi-channel TV
Sound (MTS) options: Stereo, Auto SAP, and Mono. For
details on each option, see page 80.
8 – CHANNEL + Press to scan through channels. To scan quickly through
channels, press and hold down either
CHANNEL .
– VOLUME + Press to adjust the volume.
9 VIDEO/
L-AUDIO-R
(VIDEO 2
INPUT) Connects to the composite A/V output jacks on your
camcorder or other video equipment.
0 S VIDEO
(VIDEO 2
INPUT) Connects to the S VIDEO OUT jack on your camcorder or
other video equipment that has S VIDEO. Provides better
picture quality than composite video (
9 ).
POWER
CHANNEL +
CHANNEL –
VOL – VOL +
INPUT SELECT
MTS/SAP
POWER TV VIDEO1 VIDEO2 VIDEO3 VIDEO4 VIDEO5 VIDEO6 MEMORY STICK ON/OFF TIMER
–AUDIO– VIDEO S VIDEO L R
VIDEO 2 INPUT