Sony WEGA KLV-30MR1 User Manual
Klv-30mr1, Lcd colour tv
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- GB
- NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM
- Introduction
- Table of Contents
- Safety Information
- Precautions
- Checking the Accessories Supplied
- Overview of the Display Unit
- Overview of the Media Receiver Unit Buttons and Indicators
- Overview of the Remote Control Buttons
- a To Temporarily Switch Off TV:
- b VCR or DVD on/ off:
- c Selecting input source:
- d Displaying the Memory Stick Home (“Memory Stick” picture viewer):
- e Selecting channels:
- f a) If the Media Selector is switched to TV:
- g a) If the Media Selector is switched to VCR or DVD:
- h Switching off the picture:
- i Displaying the clock:
- j This button works in Teletext mode and is also used for programming the remote control to opera...
- k Selecting screen format:
- l Selecting channels:
- m Displaying the menu system:
- n Adjusting the TV volume:
- o Selecting Sound effect:
- p Selecting Picture mode:
- q Joystick
- r NexTView:
- s Selecting Teletext:
- t Media Selector:
- u Displaying On Screen information:
- v Selecting TV mode:
- w Muting the Sound:
- Inserting Batteries into the Remote Control
- Connecting the Display Unit to the Media Receiver Unit
- Storing the cables in the display stand
- Connecting the Aerial and VCR
- Switching On the TV and Tuning the TV Automatically
- 1 Connect the display unit and media receiver unit to the mains (100 - 240V AC; 50/60Hz for the d...
- 2 The first time that the TV set is connected, it is usually turned on. If the TV is off, press t...
- 3 Press //or on the remote control to select the language, then press OK to confirm your selection.
- 4 The Country menu appears automatically on the TV screen.
- 5 The Clock Set menu appears on the TV screen.
- 6 The Auto Tuning menu appears on the screen.
- 7 The TV automatically starts searching and storing all available broadcast channels for you.
- 8 The Programme sorting menu appears automatically on the TV screen.
- 9 Press MENU to turn off the menu.
- Introducing and Using the Menu System
- Picture Adjustment
- Sound Adjustment
- Screen Control
- 1 After selecting the option, press .
- 2 Press or to select On (if you wish the TV set to automatically switch the screen format accordi...
- 1 After selecting the option, press.
- 2 Press or to select the desired screen format.
- 1 After selecting the option, press .
- 2 Press or to select the option and press . Then Press // or to adjust the size and position of t...
- 1 After selecting the option, press .
- 2 Press or to select the following option.
- Features
- 1 After selecting the option, press .
- 2 Press or to select Reduce.
- 1 After selecting the option, press .
- 2 Press or to select the desired output.
- 1 After selecting the option, press .
- 2 Press or to select Reverse. Sound from the TV’s speakers is phase-reversed.
- 1 After selecting the option, press .
- 2 Press or to select Variable (if you wish to use the TV’s remote control) or Fix (if you wish to...
- 1 After selecting the option, press .
- 2 Press or to select the desired output signal: Auto, TV, AV1, AV2, AV3 (only for AV4 Output), AV...
- 1 After selecting the option, press .
- 2 Press or to select AV3 or AV4.
- 1 After selecting the option, press .
- 2 Press or to select Auto or Manual.
- 1 After selecting the option, press .
- 2 Press or to select White or Black.
- 1 After selecting the option, press .
- 2 Press or to select Yes.
- Set Up
- 1 After selecting the option, press .
- 2 Follow steps 3 and 4 of the section “Switching On the TV and Tuning the TV Automatically” on pa...
- 1 After selecting the option, press .
- 2 Follow steps 6 and 7 of the section “Switching On the TV and Tuning the TV Automatically” on pa...
- 1 After selecting the option, press .
- 2 Follow step 8 B) of the section “Switching On the TV and Tuning the TV Automatically” on page23.
- 1 After selecting the option, press .
- 2 Press or to select the programme number with the channel you wish to name, then press OK.
- 3 Press /// to select the letter, then press OK.
- 4 When you have finished, press // or to select the word “End” on the screen and press OK to turn...
- 1 After selecting the option, press .
- 2 Press or to select the input source you wish to name. Then press .
- 3 A label automatically appears in the label column:
- A) Preset Channels, one by one, in the programme order of your choice.
- 1 After selecting the “Manual Programme Preset” option, press .
- 2 Highlight the Programme option and press .
- 3 Press or to select a programme number on which you want to preset the channel. Then press OK.
- 4 After selecting the System option, press .
- 5 Press or to select the TV Broadcast system (B/G for western European countries, D/K for eastern...
- 6 After selecting the Channel option, press .
- 7 Press or to select the type of channel to be tuned (S for cable channels or C for terrestrial ...
- 8 Highlight the Confirm option and press OK. Then press to select OK and finally press OK to store.
- B) Label a channel using up to five characters.
- 1 Highlighting the Programme option, press PROG +/– to select the programme number with the chann...
- 2 When the programme you want to name appears on the screen, select the Label option and press .
- 3 Press //or to select the letter, then press OK.
- 4 When you have finished, press // or to select the word “End” on the screen and press OK to turn...
- C) Normally the automatic fine tuning (AFT) will give the best possible picture, however you can ...
- 1 Whilst watching the channel (TV Broadcast) you wish to fine-tune, select the AFT option and pre...
- 2 Press orto adjust the fine tuning between -15 and +15 and press OK.
- 3 Highlight the Confirm option and press OK. Then press to select OK and finally press OK to store.
- D) Skip any unwanted programme numbers when they are selected with the PROG +/–.
- 1 Highlight the Programme option, press PROG +/– to select the programme number you want to skip.
- 2 When the programme you want to skip appears on the screen, select the Skip option and press .
- 3 Press or to select Yes and press OK.
- 4 Highlight the Confirm option and press OK. Then pressto select OK and finally press OK to store.
- E) View and record scrambled channels when using a decoder connected to the Scart connectors 3/ o...
- 1 After selecting the Decoder option, press .
- 2 Press or to select On and press OK.
- 3 Highlight the Confirm option and press OK. Then pressto select OK and finally press OK to store.
- Timer
- 1 After selecting the option, press .
- 2 Press or to set the time period delay (max. of 2 hours).
- 1 After selecting the option, press .
- 2 Press or to set the hour, then press .
- 3 Press or to set the minute, then press .
- 4 Press or to set the day of a week.
- 5 Press OK at the time signal. The clock starts.
- 1 After selecting the option, press .
- 2 Press or to select On, then press OK.
- 1 After selecting the option, press .
- 2 Highlight Timer and press or to select On, then press .
- 3 Press or to select On Time, then press .
- 4 Set the time for the TV to turn on itself automatically. Press or to set the hour, then press ....
- 5 Press or to select Holding Time, then press .
- 6 Press or to select the desired Holding Time. Select the holding time (max. of 5 hours) for the ...
- 7 Press or to select Weekly Setting, then press .
- 8 Press or to select the day of the week you wish to set for On/ Off Timer, then press .
- 9 Press or to select On, then press .
- 10 Repeat steps 8 and 9 to set any other days of a week.
- 11 Press or to select Programme, then press .
- 12 Press or to select the channels (TV Broadcast) that you want to watch at the time of turning o...
- 1 After selecting the option, press .
- 2 Press or to select On.
- Unit Status
- About “Memory Stick”
- Inserting and Removing a “Memory Stick”
- Using the “Memory Stick” (Memory Stick Home)
- Displaying the Memory Stick Home
- Selecting the index menu of the Memory Stick Home
- Selecting a folder that you want to view on the “Memory Stick”
- Using the Memory Stick Home
- 1 Insert a “Memory Stick” that contains the images you want to view.
- 2 Press “Memory Stick.”
- 3 Press or to highlight Select Folder, then press OK.
- 4 Press to select the list of contents, and press or to select a folder that you want to view. Th...
- 5 Press , then press // or to select an image that you want to display on the full screen or play...
- Displaying a still image on the full screen
- Playing back the moving image (Movie Player)
- Using the “Memory Stick” Slide Show
- 1 Insert a “Memory Stick” that contains the images you want to view.
- 2 Press “Memory Stick.”
- 3 Press or to highlight Select Folder, then press OK.
- 4 Press to select the list of contents, and press or to select a folder that you want to view. Th...
- 5 Press or to highlight Slide Show, then press OK.
- 6 Press or to select Start, and press OK.
- To Start the Slide Show
- To stop the Slide Show
- Caution displays while you are using the “Memory Stick”
- Caution messages while using the “Memory Stick”
- Teletext
- NexTView*
- Displaying NexTView
- Connecting Optional Equipment
- Connecting to the front of the Media Receiver Unit
- Connecting to the Rear of Media Receiver Unit
- Connecting a VCR:
- Connecting a VCR or a DVD recorder that supports SmartLink:
- If you have connected a decoder to the Scart connector 3/, or through a VCR connected to this Scart:
- Connecting to external Audio Equipment:
- Using Optional Equipment
- 1 Connect your equipment to the designated TV socket, as indicated on pages 61, 62 and 63.
- 2 Switch on the connected equipment.
- 3 To watch the picture of the connected equipment, press repeatedly until the correct input symbo...
- 4 Press the button on the remote control to return to the normal TV picture.
- Remote Control Configuration for VCR/DVD
- 1 Press the Media Selector button on the remote control repeatedly until the required VCR or DVD ...
- 2 Before the green light goes out, press and hold the yellow button for approximately 6 seconds u...
- 3 Whilst the green light is flashing, enter all three digits of the code for your brand (see next...
- 4 Turn on your VCR or DVD and check that the main functions work.
- Specifications
- Troubleshooting
- Television Channel Number Guide for United Kingdom
- DE
- Einführung
- Inhaltsverzeichnis
- Sicherheitsmaßnahmen
- Zusätzliche Sicherheitsmaßnahmen
- Kontrolle der mitgelieferten Zubehörteile
- Allgemeine Beschreibung des Fernsehers mit Bildschirm
- Allgemeine Beschreibung der Tasten und Anzeigen der Empfangseinheit
- Allgemeine Beschreibung der Tasten auf der Fernbedienung
- Einlegen der Batterien in die Fernbedienung
- Anschluss des Fernsehers mit Bildschirm an die Empfangseinheit
- Verstauen der Kabel im Ständer des Fernsehers
- Anschluss der Antenne und des Videorecorders
- Einschalten und automatische Feinabstimmung des Fernsehers
- Einführung in das Menü- System auf dem Bildschirm und seine Anwendung
- Bild- Einstellungen
- Ton- Einstellungen
- Bildschirm Einstellen
- Funktionen
- Grundeinstellungen
- Timer
- Gerätestatus
- Information über das „Memory Stick“
- Anwendung des „Memory Stick“ „MS Home“
- Anwendung des „Memory Stick“ (MS Home)
- Videotext
- NexTView*
- Anschluss von frei wählbaren Zusatzgeräten
- Anwendung der frei wählbaren Zusatzgeräte
- Grundeinstellung der Fernbedienung für einen Videorecorder oder ein DVD
- Technische Daten
- Störungsbehebung
- FR
- Introduction
- Table des matières
- Consignes de sécurité
- Précautions
- Vérification des accessoires fournis
- Présentation générale du panneau du téléviseur à écran
- Description générale de l’unité de réception
- Description générale des touches de la télécommande
- Insertion des piles dans la télécommande
- Branchement de l’ écran à l’unité de réception
- Rangement des câbles dans le support d’écran
- Branchement de l’antenne et du magnétoscope
- Mise sous tension et mémorisation automatique des chaînes du téléviseur
- Introduction au Système des menus et son utilisation
- Contrôle de l’image
- Contrôle du son
- Commande écran
- Fonctions
- Réglage
- Temporisation
- Statut téléviseur (Coordonnées de l’appareil)
- Le “Memory Stick”
- Insérer et retirer un “Memory Stick”
- Utilisation du “Memory Stick” (Origine Memory Stick)
- Télétexte
- NexTView*
- Connexion des équipements en option
- Utilisation des équipements en option
- Configuration de la télécommande pour un magnétoscope ou un DVD
- Spécifications
- Dépannage
- Les principaux émetteurs français
- Les principaux émetteurs français
- Les principaux émetteurs français
- NL
- Inleiding
- Inhoudsopgave
- Veiligheidsrichtlijnen
- Voorzorgsmaatregelen
- Meegeleverd toebehoren controleren
- Overzicht van beeldschermeenheid:
- Overzicht van de toetsen en indicaties van de ontvangsteenheid
- Overzicht van de toetsen op afstandsbediening
- De batterijen in de afstandsbediening plaatsen
- Het beeldscherm op de ontvangsteenheid aansluiten
- De kabels in de stander opbergen
- De antenne en de videorecorder aansluiten
- De TV aanzetten en automatisch afstemmen
- Inleiding en bediening van het menusysteem
- Beeldinstellingen
- Geluidsinstellingen
- Beeldregeling
- Kenmerken
- Instellingen
- Timer
- Toestelstatus
- Met betrekking tot de “Memory Stick”
- De “Memory Stick” insteken en verwijderen
- De “Memory Stick” gebruiken (Memory Stick Home Page)
- Teletekst
- NexTView*
- Extra apparatuur aansluiten
- De bediening van de extra apparatuur
- De afstandsbediening voor een videorecorder of DVD configureren
- Technische gegevens
- Problemen oplossen