Connecting a vcr, Connecting to external audio equipment, Gb connecting a vcr – Sony WEGA KLV-30MR1 User Manual
Page 61: For a sub woofer
61
Additional Information
GB
Connecting a VCR:
To connect a VCR, refer to “Connecting the Aerial and VCR” on page 22. We recommend you connect
your VCR using a Scart lead. If you do not have a Scart lead, tune in the VCR test signal to the TV
programme number “0” by using the “Manual Programme Preset” option. (For details on how to manually
programme these presets, see page 38, step A.)
Refer to your VCR instruction manual to find out how to find the output channel of your VCR.
Connecting a VCR or a DVD recorder that supports SmartLink:
If you have connected a decoder to the Scart connector
3/
, or
through a VCR connected to this Scart:
Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the “Decoder*”
option, select “On” (by using
or
). Repeat this option for each scrambled signal.
*
This option is only available depending on the country you have selected in the “Language/Country”
menu.
If you connect a DVD recorder to the Scart connector
4/
Some DVD recorders may have 576p signal format. If you wish to input the 576p signal connect the DVD
recorder to both the Scart connector
4/
and Y, P
B
/C
B
, P
R
/C
R
jacks of
5. Select the “Features”
menu and set “AV4 Input Select” to “Manual” (page 35).
Connecting to external Audio Equipment:
To listen to the sound from TV on Hi-Fi equipment:
Connect your Hi-Fi equipment to the audio output sockets J if you wish to amplify the audio output from
TV. Next, using the menu system, select the “Features” menu and set “TV Speakers” to “Off.”
For a sub woofer
Connect your sub woofer to the 5 W/G/W/G output jack M using a monaural audio cable.
SmartLink is a direct link between the TV set and a VCR or a DVD recorder. For more information
on SmartLink, refer to the instruction manual of your VCR or DVD recorder.
If you use a VCR or a DVD recorder that supports SmartLink, please connect the VCR or the DVD
recorder by using a Scart lead to the Scart connectors
3/
or
4/
.
Both Scart connectors
3/
and
4/
cannot support SmartLink at the same time. If
you connect a VCR or a DVD recorder to both Scart connectors
3/
and
4/
, select
which Scart supports SmartLink by using “Smart Link” option in the “Features” menu (page 35).
1/
R/D/D/D
5
5
L/G/S/I
Y
CTRL
S
CENTRE
SPEAKER IN
180W (6 ) MAX
P
B
/C
B
P
R
/C
R
(SMARTLINK)
(SMARTLINK)
AV
MOUSE
W/G/W/G
L/G/S/I
R/D/D/D
2/
3/
4/
DISPLAY SIGNAL OUT
BLACK
WHITE
AC IN
S
S
S
S
(continued)