1 after selecting the option, press, 3 press or to select on time, then press, 5 press or to select holding time, then press – Sony WEGA KLV-30MR1 User Manual

Page 41: 7 press or to select weekly setting, then press, 9 press or to select on, then press, 11 press or to select programme, then press, 2 press or to select on

Advertising
background image

41

Menu System

GB

On/Off Timer

The “On/Off Timer” option allows you to turn the TV on and off
automatically at a specified time automatically. To use this function, set
the clock in advance (page 40).

• If you change the following settings, Off is selected automatically

in the Timer option. In this case, select On in the Timer option.

– Unplugging the mains lead of the media receiver unit
On Time, Holding Time, Weekly Setting, Repeat, Programme

option settings

To do this:

1

After selecting the option, press

.

2

Highlight Timer and press

or

to select On, then press

.

3

Press

or

to select On Time, then press

.

4

Set the time for the TV to turn on itself automatically. Press

or

to set the hour, then press

. Next press

or

to set the minutes,

then press

.

5

Press

or

to select Holding Time, then press

.

6

Press

or

to select the desired Holding Time. Select the holding

time (max. of 5 hours) for the TV to switch itself automatically into the
standby mode.

7

Press

or

to select Weekly Setting, then press

.

8

Press

or

to select the day of the week you wish to set for On/

Off Timer, then press

.

9

Press

or

to select On, then press

.

10

Repeat steps 8 and 9 to set any other days of a week.

11

Press

or

to select Programme, then press

.

12

Press

or

to select the channels (TV Broadcast) that you want

to watch at the time of turning on the TV, then press

.

To turn the TV on and off at a specified time everyday, set Repeat
to On after step 2, then go to step 3.

To cancel this function afterwards, select Off instead of On in step 2
above.

Auto Shutoff

The “Auto Shutoff” option allows you to set the TV to change to the
standby mode automatically if there is no input signal through the
connected equipment.

To do this:

1

After selecting the option, press

.

2

Press

or

to select On.

Auto Shutoff cannot be set when the TV receives the TV Broadcast signal.

Advertising
This manual is related to the following products: