Media receiver unit rear panel, Setup – Sony WEGA KLV30XBR900 User Manual
Page 20
18
Setup
Media receiver unit
Rear Panel
AUDIO IN
AV MOUSE
4
HD/DVD IN
( 1080i / 720p / 480p / 480i )
CONTROL S
AUDIO
OUT
SUBWOOFER
OUT
R–AUDIO–L
Y
P
B
P
R
5
1
6
VIDEO IN
DISPLAY SIGNAL OUT
MONITOR OUT
DVI–HDTV IN
WHITE
R–AUDIO–L
R–AUDIO–L
VIDEO
S VIDEO
3
VHF/UHF
R–AUDIO–L
VIDEO S VIDEO
OUT
AUX
TO
CONVERTER
DVI–HDTV
BLACK
R–AUDIO–L
~
AC IN
(VAR/FIX)
(VAR)
Jack
Description
1
CONTROL S OUT
Allows the TV to send remote control signals to other Sony infrared-controlled audio or
video equipment that has the CONTROL S function.
2
AUDIO OUT
(VAR/FIX)
R-AUDIO-L
Connects to the left and right audio input jacks of your audio or video equipment. You can
use these outputs to listen to your TV’s audio through your stereo system.
3
SUB WOOFER OUT
(VAR)
Connects to the input jack of your sub woofer.
4
VHF/UHF
Primary RF input that connects to your VHF/UHF antenna or cable.
5
TO CONVERTER
Connects to your cable box input jack. This VHF/UHF output jack lets you set up your TV
to switch between scrambled channels (coming through a cable box) and unscrambled cable
channels. Use this jack instead of a splitter to get better picture quality when you need to
switch between scrambled and unscrambled cable channels. For details, see pages 24 and 25.
6
AUX
Auxiliary RF input that connects to your antenna, CATV cable, or cable box output jack.
This is convenient if you are using two VHF/UHF sources (antenna, CATV cable, or cable
box). For details, see pages 24 and 25.
7
MONITOR OUT
S VIDEO/VIDEO/
R-AUDIO-L
Lets you record the program you are watching to a VCR. When two VCRs are connected,
you can use the TV as a monitor for tape-to-tape editing (not available with 480p, 720p, or
1080i when the input is set to VIDEO 4-6).
8
DVI-HDTV IN
DVI-HDTV/
R-AUDIO-L
(VIDEO IN 6)
Can accommodate a copy-protected digital connection (HDCP*) to other devices (such as
digital set-top boxes) that have compatible interfaces. The DVI-HDTV input terminal is
compliant with the EIA-861 standard and is not intended for use with personal computers.
See the instruction manual that came with your equipment for details about connecting and
using it with the TV.
Use a DVI-D single link cable.
9
DISPLAY SIGNAL
OUT
Connects to the display input jack of the display unit by using the supplied display interface
cable.
0
S VIDEO
(VIDEO IN 1/3)
Connects to the S VIDEO OUT jack of your VCR or other video equipment that has
S VIDEO. S VIDEO provides better picture quality than either composite video (
qa
) or
VHF/UHF (
4
) connections.
qa
VIDEO/R-AUDIO-L
(VIDEO IN 1/3)
Connect to the composite A/V output jacks on your VCR or other video component. A third
component A/V input jack (VIDEO 2 INPUT) is located on the front panel of the Media
receiver unit. These video connections provide better picture quality than the VHF/UHF
(
4
) connections.
* High-bandwidth Digital Content Protection