Sony WEGA KLV30XBR900 - Manual (Page 22)

20
Setup
Installing the TV
1
Connect the display interface cable (supplied) to the display unit’s DISPLAY
SIGNAL IN jack, and connect the AC power cord (supplied) to the display
unit’s AC IN jack.
Disconnect all power sources before making any connections.
2
Install the display unit using an optional wall mount unit.
For details, refer to the operating instructions supplied with your wall mount unit.
If not using wall mount unit, pass a wire through two holes to anchor it to the wall.
BLACK
DISPLAY SIGNAL IN
WHITE AC IN
Display interface
cable (supplied)
Tighten the
screw slowly
until the
screw is
stabilized.
AC Power cord
(supplied)
After making all
connections,
connect to a wall
outlet.
To Media receiver unit.
Anchor holes to prevent falling