Sony WEGA KLV30XBR900 - Manual (Page 32)

30
Setup
VCR and Cable For best results, use this connection if:
s Your cable company does not require you to use a cable box.
To connect the VCR and cable
1
Connect the CATV cable to the VCR’s VHF/UHF input jack.
2 Use the supplied antenna cable to connect the VCR’s VHF/UHF output
jack to the TV’s VHF/UHF jack.
3
Use an A/V cable to connect the VCR’s A/V output jacks to the TV’s
A/V input jacks.
4
Run the Auto Setup program, as described in “Setting Up the Channel
List” on page 49.
Using S VIDEO jacks? See page 29.
About Using This Connection with Dual Picture (Twin View, etc.) Features
With this connection, you can use all the dual picture features.
AUDIO
OUT
SUBWOOFER
OUT
1 6
VIDEO IN DISPLAY SIGNAL OUT
DVI–HDTV IN
WHITE
R–AUDIO–L
R–AUDIO–L
VIDEO S VIDEO
3
VHF/UHF AUX
TO
CONVERTER
DVI–HDTV
BLACK
R–AUDIO–L
(VAR/FIX) (VAR)
Rear of Media receiver unit
A/V cable
Antenna cable (supplied)
VCR
CATV cable