Sony WEGA KLV30XBR900 - Manual (Page 99)

97
Other Inf
o
Remote Control
Memory Stick
Problem Possible Remedies
Remote control does not
operate s The batteries could be weak. Replace the batteries.
s Check the orientation of the batteries.
s Press FUNCTION repeatedly until the TV indicator lights up. You may have
inadvertently pressed FUNCTION , which changes the remote control to SAT or
CABLE mode.
s Make sure this unit’s power cord is connected securely to the wall outlet.
s Locate the unit at least 3-4 feet away from fluorescent lights.
Cannot change channels with
the remote control s If you are using the TV to change channels, first press FUNCTION repeatedly
until the TV indicator lights up.
s If you are using another device to change channels, be sure you have not
inadvertently switched your TV from the channel 3 or 4 setting. Use the
Channel
Fix option to “fix” the channel based on the hookup you used (see page 84).
s If you are using another device to change channels, be sure to press FUNCTION
for that device. For example, if you are using your cable box to change channels,
be sure to press
FUNCTION repeatedly until the SAT/CABLE indicator lights up.
Remote control does not
operate non-Sony video
equipment s If you replaced the batteries to the remote recently, the code numbers for the video
equipment may need to be reset.
s There may be more than one code for the equipment that you are attempting to
operate.
s There is a possibility that some non-Sony equipment cannot be operated by your
Sony TV remote.You may need to use the equipment’s original remote control.
Problem Possible Remedies
Image does not display s Make sure the image is supported by the TV (see page 68).
s Make sure the Memory Stick is inserted properly (see page 70).
s Memory Stick functions are not available while using Twin View, Freeze or
Favorite Channel functions.
Blank square appears instead of
a thumbnail image s This indicates that the image does not support a thumbnail view. Selecting the
icon, however, displays the full-size image on the screen. It could also indicate
that both the thumbnail and full-size images are corrupted or not supported.
Cannot rotate image, no
thumbnail appears s Be sure the LOCK switch on the Memory Stick is set to off.
s If a blank square appears instead of the thumbnail image, this indicates that the
image does not support a thumbnail view and cannot be rotated.
Cannot hear audio while using
Memory Stick s There is no audio available while using Memory Stick.
Image file name does not
appear; instead, dashes (---)
appear s Dashes appear instead of the file name if the image was recorded using equipment
that is not DCF-compliant. Dashes also appear if a DCF-compliant file was
renamed.