Smeg A31G7IXIA - Manual (Page 16)

52
Instructions for the user
6.7.2 Heating accelerator
Each cooking zone has a heating accelerator.
This system lets the burner operate at maximum power for a time that is
proportional to the selected power.
To start the heating accelerator, turn the knob to the left, select the “A”
position and release. The letter “A” appears on the cooking hob display.
At this point you have 3 seconds to choose the desired heating position.
Once the position has been adjusted between 1 and 9, “A” and the
selected position will flash on the display.
During the heating accelerator's operation it is possible to increase the
heating intensity at any time. The “full power” period will consequently be
modified.
On the other hand, if the power is reduced, turn the knob anti-clockwise.
“A” option is automatically deactivated.
6.7.3 Operating power settings
Below is provided a table with the maximum power consumptions of the
burners.
Zone
Number:
Zone Diameter Power consumed
1 210 mm
Normal operation: 1850 W
With power function: 2500 W
2 145 mm
Normal operation: 1400 W
With power function: 1800 W
Before using the hob for the first time, pre-heat it to the maximum
temperature long enough to burn any manufacturing oily residues which
could give the food a bad smell.