Samsung CL80 - Manual (Page 111)

Wireless network/Bluetooth 110
Sending photos via Bluetooth
After sending is complete, select
7
“ Yes.
The camera and the device are disconnected and the t

Bluetooth feature turns off.
The camera may not search for a specific Bluetooth-enabled device t

and send a photo to it depending on the device type.
If the other device does not have enough memory, the photo may not t

be transferred. Delete some photos to free up some memory and try
sending again.
You cannot connect to several Bluetooth-enabled devices at one time. t

Place the camera and the Bluetooth-enabled device reasonably close t

to one another.
The camera may cause interference with other devices that use or t

produce radio waves.
When there are no photos in the camera memory, you cannot use t

this feature.
You can send photos only to Bluetooth-enabled phones or PDAs that t

support the Object Push Profile (OPP).
Some phones or PDAs may not display photos you sent via Bluetooth. t