Samsung DVD Recorder - Manual (Page 3)

Step Step Setup
Wait! Make sure you complete Step before proceeding
with Step .
After all connections are complete, plug the power cord in the wall
outlet. The word “AUTO” will flicker in the front panel display. It
means that the current time is being set automatically (Auto
Program) through the antenna under connection and also the chan-
nel is being set. The setup may take a few minutes. When it normally
operates, the current time is automatically set and displayed in the
front panel display.
If “- - - -“ appears, however, it means that auto time setting has
failed. In that case, set the current time through the manual initial
setup.
For ease of use, we recommend that you complete the following set-
tings before using the DVD Recorder.
Turn on your TV and any other connected equipment
OSD(On-Screen Display) Language Setup
Clock Set
Channel Set
Audio Setup
Video Setup
Turn on your TV and any other connected
equipment
OSD Language Setup
Press the DVD POWER button.
The initial set up OSD language menu will appear.
Select the desired lan-
guage using the number
buttons.
Clock Set
With the unit in Stop mode, press the MENU button.
Select Setup using the
…/†buttons, then press
the √ or ENTER but-
ton.
Select System using the
…/† buttons, then
press the √ or ENTER
button.
Select Clock Set using
the …/† buttons, then
press the √ or ENTER
button.
Select Auto Clock Set using the …/† buttons, then press the
√ or ENTER button.
Select On using the
…/† buttons, then
press the √ or ENTER
button.
The DVD Recorder automatically sets the clock by searching for a
channel that carries a time signal and sets your time zone and
daylight saving(if applicable).
If your clock is set to the wrong time zone or daylight saving,
you can adjust these settings without turning off the Auto Clock Set
function (see page 24). If your clock cannot be set automatically,
set the clock manually (Refer to “Manual Clock Set” on page 25 of
the Instruction Manual for more information).
RETURN SELECT MOVE EXIT
Setup No Disc
System √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
RETURN SELECT MOVE EXIT
System No Disc
Clock Set √ √
Channel Set √ √
CM Skip Time : 15 Sec √ √
RETURN SELECT MOVE EXIT
Clock Set No Disc
Auto Clock Set √ √
Manual Clock Set √ √
RETURN SELECT MOVE EXIT
Auto Clock Set No Disc
Auto Clock Set : On √ √
Clock Data CH : Automatic √ √
Time Zone : Automatic √ √
Daylight Saving : Automatic √ √
Off
On
-
-
-
-
3