Samsung digimax U-CA 501 - Manual (Page 41)

41
Effect
[ PROGRAM mode ] [ Lightly press the shutter button ]
Photo Frame
Allows the user to adjust the R (Red), G (Green), and B (Blue) values of the images to be
captured.
Setting RGB Values
1. Select the [RGB] sub menu and then press the OK
button. The RGB menu bar will appear as shown.
2. Use the UP/ DOWN/ LEFT and RIGHT buttons to select
the desired RGB value.
- UP/ DOWN Button: Navigates between R, G, and B
icons.
- LEFT/ RIGHT Button: Changes value of each icon.
3. When you press the OK button, the value you set will be
saved and RGB setup mode will end.
EXIT:SH1 SET:OK
- When you press the Shutter button half-way, autofocus will be performed and the selected
photo frame will appear simultaneously.
- You can check the photo frame you added to pictures in Quick View or Play mode.
- If you select the [OFF] sub menu in the [P.FRAME] menu or turn on and off the camera in
the PROGRAM mode, the selected photo frame will be cancelled.
- Available photo frames are as follows:
You can add 9 types of frame-like borders to a still image you want to capture.
2048
P.FRAME
RGB 1
FRAME OFF