Setup – Samsung 181B User Manual
Page 14
Advertising
User’s Manual 14
Setup
1. Connect the power cord for your monitor to the power port on the back of the monitor.
Plug the power cord for the monitor into a nearby outlet.
2. Connect the signal cable to the 15-pin, D-sub connector on the back of your monitor.
3. If you are using a Macintosh computer, connect the cable to a Macintosh adapter, and set the
pins on your adapter(Adapter not included). A PC-compatible computer does not need an
adapter.
Note : Turn on your computer and monitor. If your monitor displays an image, installation is
complete.
Connecting Your Monitor
Advertising
This manual is related to the following products: