Sharp AR-FX9 - Manual (Page 62)

58
HOW TO USE THE FAX FUNCTION
TWO-SIDED ORIGINAL TRANSMISSION FUNCTION
(AR-168D only)
The RSPF can be used to automatically fax a two-sided original. If desired, the back of the original can be rotated
180° before transmission.
Follow these steps to fax a two-sided original:
1 Place the original(s) in the RSPF.
(p.52)
2 Press the [2-SIDED TX] key until the
desired setting appears.
If you wish to rotate the
back of the original 180°,
select "ON (ROTATE)".
The selections are as
follows:
OFF
ON (ROTATE)
ON (NON-ROTATE)
3 Press the [ENTER] key.
• The original must be placed in the RSPF when using the two-sided original transmission function. The
document glass cannot be used.
• The two-sided original transmission function cannot be used in direct transmission mode.
• The two-sided original transmission function cannot be selected when direct transmission mode is selected.
Likewise, direct transmission mode cannot be selected when the two-sided original transmission function is
selected.
Note
Original face up
MEMORY
CONTRAST
LINE STATUS SPEAKER
REPORT
SPEED/
SEARCH BROAD-
CAST
COVER
SHEET
RECEPTION
MODE REDIAL/
PAUSE
2-SIDED TX
RESOLU-
TION