Swann Theft Deterrent Imitation Cam - Manual (Page 2)

You should position your cameras to cover the areas most exposed to risk.
See our suggestions below for some ideas:
Where to Place The Security Stickers:
1. On your front window
2. On side windows
3. Near entrance points - doors, gates
4. Next to a dummy camera mounted outside
5. On the front counter
6. On the cash register
7. Next to an obvious camera
1. Doorways
5. Reception
areas 6. Cash
register 7. Mix
dummies
& real
cameras
2. Windows 3. Car Parks 4. Verandahs
Tips for locating your camera
1. Using the wall mounting plate as a template, use a pencil to mark the
position of the three screw holes on the mounting location.
2. Drill three holes to suite screws in the marked positions.
3. If necessary, insert three mounting screw plugs into the screw holes.
4. Insert a screw through each of the three screw holes in the wall mounting
plate and into the mounting surface, then tighten the screws.
5. Insert the bolt at the top of the camera stand into the nut on the bottom of the
Dummy Maxi-Brite camera, use the spacer to stable the camera then use a
pair of pliers to firmly tighten it.
6. Turn the camera stand’s knob to tighten the swivel on the camera stand.
Mounting the camera on your wall or ceiling
Wall Mounting Plate Wall Mounting Plate
Knob Knob
Spacer Spacer
Screw Screw
Mounting
Screw Plug
Mounting
Screw Plug
Bolt Bolt