Sony PEG-UX40 - Manual (Page 39)

39
Sony Personal Entertainment Organizer PEG-UX50/UX40 4-676-072-11 (1)
Connect
ing to
the
Inte
rn
et
A SSID
Enter the setting for 1 SSID recorded on the check sheet.
Note
Alphabet input is case sensitive.
B WEP Key
Enter the setting for 2 WEP Key recorded on the check sheet.
C Adhoc mode
You can communicate with other wireless LAN compatible devices (e.g. wireless
LAN enabled PC) without connecting to the wireless LAN access point when
[Adhoc mode:] is selected.
D Power Save
You can enable the power saving function when [Power Save:] is selected.
Note
You cannot select [Power Save:], when [Adhoc mode:] is selected.
Tip
You can disable the power saving for communicating with maximum power when
the wireless LAN is unstable. However, the battery power is quickly consumed.
Select [Power Save:] for normal use.
E IP address
Deselect [IP address:] to disable DHCP, and you can enter the settings for
3
Primary DNS, 4 Secondary DNS, 5 IP Address, 6 Netmask (Subnet
mask), and 7 Router (Gateway) in the following IP Address screen.
F Auto Connect
When [Auto Connect:] is selected, the wireless LAN access point can be a
candidate to be automatically connected by your CLIÉ handheld when it accesses
wireless LAN.
6
Tap [OK].
The Wireless LAN Setup screen is displayed.
7
Tap [OK].
The Preferences screen is displayed.
01US01COV.book Page 39 Friday, July 11, 2003 7:01 PM