Sony PEG-UX40 - Manual (Page 8)

8
Sony Personal Entertainment Organizer PEG-UX50/UX40 4-676-072-11 (1)
Perform the following before setting up your CLIÉ handheld.
Step 1: Charging your CLIÉ handheld
Setting up your CLIÉ™ handheld
Step 1: Charging your CLIÉ handheld
Step 2: Performing the initial setup after turning on your
CLIÉ handheld for the first time
Before using your CLIÉ handheld for the first time, be
sure to fully charge the battery.
1
Connect the AC power adapter to the charger cradle’s AC
power adapter connector.
2
Connect the AC power adapter to a wall outlet.
3
Align and attach the front clasps of the charger cradle
with the holes on the back of your CLIÉ handheld (1),
then gently lay it down (2).
The POWER LED of your CLIÉ handheld turns on when charging starts.
Tips
• To remove your CLIÉ handheld from the charger cradle, lift up from the rear
(camera lens side).
• Clean the connectors if they get dirty.
To a wall
outlet
01US01COV.book Page 8 Friday, July 11, 2003 1:15 PM