User instructions – Smeg KLVS50EB User Manual
Page 6
User instructions
TABLE FOR CERTIFICATION BODIES
Reference standard
EN 50242
Reference program
(*) Selector on P4
Load
12 place-settings
Type of detergent
B
Amount of detergent
30 g
Rinse aid setting
Depending on the model 3/4 or 4/6
Washing
programs
The dishwasher is equipped with a control panel and an 3-FIGURE DISPLAY (6), described in
chapter "1. Description of the controls", from which it is possible to carry out all the power switch-
on, switch-off and programming operations.
Before starting a washing program make sure that:
•
The water supply tap is open.
•
The correct amount of detergent has been added to the dispenser.
•
The baskets have been correctly loaded.
•
The spray arms are able to rotate freely and without obstruction.
•
The dishwasher door is securely closed.
HALF-LOAD FUNCTION (available in all programs except the soak program)
This function is recommended for loads of up to 6 place-settings, and cuts down on the use of
water and electricity. It is controlled by the HALF LOAD button (4) and allows washing in the upper
basket only.
IMPORTANT: at the end of the program remember to deactivate the function to ensure the next
wash is not also carried out in half load mode by mistake.
A cutlery basket can be placed in the upper basket, while the lower basket must be left empty.
CAUTION: there is no point in loading dishes and cutlery in the lower basket, since the jet of
water will only reach the upper basket.