Samsung CAPTIVATE SGH-I897 - Manual (Page 49)

Call Functions 44
– Touch Mute again to unmute the microphone. The green line will turn
grey when Mute is not activated.
• Headset connects to a Bluetooth headset.
– Touch Headset during a call to activate a Bluetooth headset. A green
line will appear under the Headset button.
– Touch Headset again to de-activate the Bluetooth headset. The green
line will turn grey when the Headset is not activated.
• Touch for more options:
– Contacts: allows you to go to your Contact list.
– Memo: allows you to jot down a memo during a call.
– Noise Reduction On/Off: allows you to turn on the Noise Reduction
feature when you are in a noisy area. Turn it Off when not needed to
conserve battery power.
Placing a Call on Hold
You can place the current call on hold at any point during a
conversation. You can also make another call while you have a
call in progress if your network supports this service.
1. While on a call, touch Hold . This action places the
current caller on hold (which is displayed on-screen as a
greyed-out box).
2. You can later reactivate this call by touching Resume.
To make a new call while you have a call in progress
1. Touch .
2. Touch Add call to display the dialer.
3. Enter the new number and touch .
Once connected, the active call will appear in a green box
and the call on hold will appear in a gray box.
Switching Between Calls
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold.
1. Touch Swap.
The current call (caller #2) is placed on hold and the
previous call on hold (caller #1) is then reactivated so that
you can continue conversing with that person. The active
call will appear in a green box.
2. Press to end the currently active call.