Sony MV-101 - Manual (Page 13)

13
DVD/Video CD/
CD Player
This chapter describes how to play a disc.
Playing a disc
1
Press (POWER) to turn on the player.
2
Open the front panel.
3
Insert the disc (labeled side up or the
surface you want to play down if the
disc is a DVD).
If a disc is already inserted, press u to start
playback.
Note
Even when the player is turned off, you can eject a
disc from the player, though you cannot insert a
disc.
To Do this
Stop playback Press x* 1
Eject the disc Open the front panel,
then press Z on the
player.
Pause Press u * 2
Resume playback Press u
after pause
Go to the next chapter,
Press >
track, or scene in
continuous play mode
Go back to the preceding Press .
chapter, track, or scene in
continuous play mode
Fast forward
Press M/y while
playing*
3 * 4
Fast reverse Press /m while
playing* 3 * 4
Slow forward Press M/y in
(DVD/Video CD only) pause* 4
Slow reverse Press /m in
(DVD only) pause
* 1 If the resume playback function is activated, you
can resume playback later by pressing u. For
details, see “Resume playback.”
* 2 DVD/Video CD
Both the picture and sound stop during pause
and “PAUSE” is displayed on the screen.
Audio CD
The sound stops and “PAUSE” is displayed on
the screen.
* 3 DVD/Video CD/Audio CD
Playback increases to 4 times the speed with
no sound.
* 4 A disc other than a DVD returns to normal
playback when a track/MP3 file finishes.
Notes
• Depending on the recording method used on the
disc, it may take a minute or more before
playing.
• Depending on the condition of the disc, it may
not play back (page 7).
• If you play a high-bit rate MP3 file such as 320
kbps, sound may be intermittent.
ENTER
SEARCH
POWER DISPLAY
CLEAR
SETUP
AUDIO
ANGLE
SUBTITLE
MENU
TOP MENU
INPUT
MONITOR
POWER
1 2 3
4 5 6
7 8 9 0
VOL
./>
u
x
POWER
SEARCH
M/m
</,
/y
m/M
Number
buttons
continue to next page t