Sharp AQUOS 10P03-MX-NM User Manual

Page 27

Advertising
background image

25

Color Temp.
(Color Temperature)

For a better white balance, use color temperature correction.

High:

White with bluish tone

Mid-High:
Middle:
Mid-Low:
Low:

White with reddish tone

White balance can be adjusted between a maximum of
+30 and a minimum of –30 for each color temperature.

R Gain (LO/HI): –30 through +30
G Gain (LO/HI): –30 through +30
B Gain (LO/HI): –30 through +30

For resetting all adjustment items to the factory preset
values, press

a/b to select "Reset", and then press

ENTER.

Motion Enhancement

Use Motion Enhancement to view fast-action video
more clearly.

120Hz High/120Hz Low: For obtaining a clearer image.
Off: Normal image.

• "Motion Enhancement" may cause image noise. If this

occurs, turn the function "Off".

• When AV MODE is set to "GAME" or PC format is being

input, "Motion Enhancement" is not available.

Active Contrast

Automatically adjusts the image contrast according to
the scene.

On: Automatically adjusts the image contrast.
Off: No adjustment.

Gamma Adjustment

Adjusts the differences of picture tones between bright
parts and dark parts. The adjustment range of the
gamma can be set to a maximum of +2 and a minimum
of –2 by pressing

c or d.

Black Level

Adjusts on-screen black level to your preferred level.

High: The black level gets brighter.
Low: The black level gets darker.

"Black Level" is available for input signal from Composite
Video, Component 480i and analog broadcasts (air and
cable).

Film Mode (3:2 pull-down)

Automatically detects a fi lm-based source (originally
encoded at 24 frames/second), analyzes it then recreates
each still fi lm frame for high-defi nition picture quality.

Advanced(High)/Advanced(Low): Select a desired level

to remove jerkiness from fi lm contents.

Standard: Detects, analyzes, converts fi lm source.
Off: Normal viewing mode.

"Film Mode" does not function when you set AV MODE to
"GAME".

"Standard" does not function when channel display shows
an input signal resolution of 480p, 720p, or 1080p.

"Film Mode" is not available during PC format input.

On-Screen Display Menu

Digital Noise Reduction

Produces a clearer video image.

Auto: Automatically adjusts the level of noise reduction.
High/Middle/Low: Select a desired level for viewing a

clearer video image.

Off: No adjustment.

• "Digital Noise Reduction" is not available during PC format

input.

• When AV MODE is set to "GAME", "Auto" is not available.

3D-Y/C

Provides high quality images with minimal dot crawl
and cross color noise.

Slow: For still images.
Standard: Normal adjustment.
Fast: For moving images.

• "

3D-Y/C" is available for input signal from Composite Video

and analog broadcasts (air and cable).

Monochrome

For viewing a video in monochrome.

On: For viewing in monochrome.
Off: Normal color.

Range of OPC

The brightness level range of the OPC sensor's automatic
adjustments can be set according to your preferences.
The adjustment range of the OPC sensor can be set to
a maximum of +16 and a minimum of –16.

Max.: –15 through +16
Min.: –16 through +15

The "Range of OPC" settings are active only when "OPC"
is set to "On".

The maximum setting cannot be set to a smaller number
than the minimum setting.

The minimum setting cannot be set to a bigger number
than the maximum setting.

Depending on the brightness of the surrounding light, the
OPC sensor might not operate if the adjustment range is
small.

Advertising