Sherwood HSB-600 - Manual (Page 7)

Part Names and Functions
1. HDMI OUT
2. OPTICAL OUT (Digital Audio)
3. HDMI INs 1 and 2
4. COMPONENT INs (Analog Video) 5. OPTICAL IN (Digital Audio)
6. IR IN
7. RS-232C
8. AC INPUT cord
1. POWER (ON/STANDBY) button
Each time the POWER button is pressed, this unit is
turned on to enter the operating mode or off to enter
the standby mode.
2. STANDBY Indicator
In the standby mode, the STANDBY indicator
lights up.
3. Remote sensor
This receives the signals from the remote control unit.
4. HDMI1, 2 and AV Indicators
Each time the INPUT selector button is pressed, the
corresponding indicator lights up.
5. INPUT selector button
Press this button to select the desired input source.
FRONT PANEL
BACK PANEL
REMOTE CONTROL
1. STANDBY button
Press the STANDBY button to enter the
standby mode.
2. POWER ON button
Press the POWER ON button to enter the
operating mode.
3. HDMI 1, 2 input selector button
Press the HDMI 1 or 2 button to select the
desired input.
4. AV input selector button
Press the AV button to select the desired input.
6