Steamfast PORTABLE POWER STEAM CLEANER SF-246 User Manual

Page 13

Advertising
background image

13

Top Innovations

C

ARE

& S

TORAGE

G

UIDELINES

PROPER STORAGE

Preparing your Portable Power Steam Cleaner for storage is quick and simple. When you have

finished with your unit, follow the steps listed below.
1. Unplug power cord from electrical outlet.

2. Allow unit to completely cool (at least 30 minutes).

3. Press and hold Steam Trigger to release all remaining steam.

4. Remove all connected accessories from unit.

5. Remove Boiler Cap and drain any water remaining in Boiler into sink or tub. Replace Boiler

Cap.

6. Wrap power cord loosely around unit and store Portable Power Steam Cleaner and all accessories

in a cool, dry place.

REMOVING MINERAL BUILD-UP

A common maintenance need for steam appliances is the removal of build-up caused by high

mineral content in many municipal water supplies. This mineral build-up may limit the

effectiveness and reduce the life of your Portable Power Steam Cleaner.
The best way to minimize mineral build-up is to use distilled or de-mineralized water when

using your Portable Power Steam Cleaner. Using distilled water will help to extend the life of

your Portable Power Steam Cleaner, and keep it functioning at its maximum potential.
If distilled water is unavailable, it is recommended the following procedure be used once every

2-3 uses.

1. Unplug power cord from electrical outlet.

2. Allow unit to completely cool (at least 30 minutes).

3. Press and hold Steam Trigger to release all remaining steam.

4. Remove all connected accessories from unit.

5. Remove Boiler Cap and drain any water remaining in Boiler into a sink or tub.

6. Using Measuring Cup, make a mixture of 8 oz. (237 ml.) vinegar and 8 oz. (237 ml.) water.

7. Slowly pour water-vinegar solution into Boiler, then replace Boiler Cap.

8. Allow water-vinegar solution to sit in Boiler for 40-60 minutes. Afterwards, shake unit

vigorously to further loosen mineral deposits.

9. Remove Boiler Cap and drain water-vinegar solution into a sink or tub.

10. Rinse out Boiler with fresh water until vinegar odor dissipates.

11. Replace Boiler Cap.

12. Wrap power cord loosely around unit and store Portable Power Steam Cleaner and all

accessories in a cool, dry place.

If distilled water is used, it is still recommended to clean out Boiler after 15-20 hours of use. Do

not exceed 20 hours of use without cleaning unit.

Advertising