Southwestern Bell GH3060 - Manual (Page 9)

Telephone Operation (Cont.)
Your GH3060 is equipped with 10 memories
for programming your most frequently dialed
telephone numbers. You can store up to 16
digits in each of the memory locations 0
through 9, by following the steps outlined
below. A record of the numbers to be
speed-dialed may be kept on the speed
dialing numbers index on page 33.
Memory Features
1. Press the "MEM" button on the handset,
and the display will show "MEM x", with "x"
representing the memory location that is
currently displayed.
To Program Frequently
Called Numbers
2. Press the " *" or "# " button to select the
memory location where the telephone number
is to be stored. You can choose from MEM 0-
MEM 9.
Note : If a particular memory location is not
empty, the display will show the current
memory location and telephone number.
3. Enter the telephone number you wish to
store, using the handset keypad.
Note : If you accidentally press a 17th digit,
an error tone will sound, and you must
reprogram the number.
- Press the "REDIAL" button to enter a
4-second pause into the dialing sequence.
A "P" will appear in the number sequence
to show where the pause has been inserted.
4. To delete a particular digit that has
already been entered, press the "DEL"
button. The last entered digit will be
deleted. To delete all of the digits, press the
"FLASH" button.
5. Press the "MEM" button to confirm the
entered telephone number. The display will
show "LOCATION ? x", with "x"
representing the current memory location.
6. Press the "MEM" button again to
confirm that you want to save the telephone
number to that particular memory location
number. If you want to choose another
memory location number, press "* "or "# ",
or enter in the desired memory location,
using the handset keypad. The display will
show "MEM x STORED", with x
representing the memory location number.
Telephone Operation (Cont.)
The GH3060 also functions as a scratchpad.
If you want to save a displayed telephone
number (up to 16 digits) into speed dial
memory.
Scratchpad Memory
1. Press the "MEM" button on the handset.
The display will show "LOCATION ? x",
with "x" representing the first empty
memory location.
2. Press the "MEM" button again to
confirm that you want to save the
telephone number to that particular
memory location number. If you want to
choose another memory location number,
press " * ","#
" or enter in the desired
memory location, using the handset
keypad. The display will show "MEM
x STORED",with "x" representing the
memory location number.
1. Press the "MEM" button on the handset,
and the display will show "MEM x" with "x"
representing the memory location that is
currently displayed.
To Delete a Memory Location
2. Press the " *" or "# " button to select the
memory location where the telephone number
is to be deleted.
3. Press the "DEL" button to delete that
memory location. The display will show
"ERASE ?".
4. Press the "DEL" button again to confirm
that you want to delete this memory location,
and the memory location will be erased. If you
do not want to delete that memory location,
press any other key to cancel this procedure.
#
CH
RED IAL
VOL /RIN G
1 2 ABC
3 DEF
0 OPER
CALL S
DEL
TALK
MEM
FLAS H
7 PQRS 8 TUV
9 WXYZ 4 GHI 5 JKL
6 MNO
15 16