Sharp MD-MT877H - Manual (Page 45)

45
Web-site: www.sharp.co.uk/support Help Line: 08705 274277 (office hours)
Advanced Features
– T
itling a MiniDisc –
To add characters
1
Put the unit in the character input mode.
(Perform steps 1 - 2 on page 43.)
2
Press the VOL + or VOL – button to move the
cursor to the right of the character, where you
want to add a new character.
3
Select the character to add.
(Perform steps 3 - 4 on page 43.)
4
Press the ENTER button.
Titling a MiniDisc : continued
5
Press the EDIT button.
6
TOC will be displayed to write the updated
contents to the MiniDisc press the • ■ / :OFF
button.
● You cannot remove the MiniDisc whilst TOC is
displayed. TOC will not disappear until the re-
corded contents have been updated.