Seiko Instruments DPU-30 - Manual (Page 40)

5-12
5.4.3 Mode 3
1. Paper feed commands
CR Carriage Return
Code 0D
16
Function Prints the data stored in the print buffer, and then starts a new line according to the
defined amount of paper feed for one line.
Details • After executing this command, a head of a line is set as a starting position of
printing.
• LF command received immediately following CR is ignored.
LF Line Feed
Code 0A
16
Function Provides the same function as CR.
Details • After executing this command, a head of a line is set as a next starting position of
printing.
• LF command received immediately following CR is ignored.
FF Page Length Print
Code 0C
16
Function Feeds paper based on the setting of page length.
Details • After executing this command, a head of a line is set as a next starting position of
printing.