Allshare – Samsung WAVE II GT-S8530 User Manual
Page 100
Connectivity
100
High-bitrate contents may not play properly with
•
wireless network.
You may not be able to use some content
•
depending on file type.
You must first activate the WLAN feature and add a WLAN
profile.
►
p. 98
Customise DLNA settings for sharing
›
media files
To allow other DLNA-enabled devices to access media files
on your device, you must activate media sharing.
In Menu mode, select
1
Settings
→
Connectivity
→
AllShare
→
Settings.
Adjust the following settings to customise the DLNA
2
feature:
›
Connect to a WLAN using a Wi-Fi
Protected Setup (WPS)
In Menu mode, select
1
Settings
→
Connectivity
→
Wi-Fi.
Select
2
WPS PBC or WPS PIN depending on the AP
device type.
Press a WPS button on the AP device within 2 minutes.
3
Or, enter a PIN on the AP device and select Start within
2 minutes.
AllShare
Learn to use the Digital Living Network Alliance (DLNA)
service that enables you to share media files between
DLNA-enabled devices in your home over a WLAN.