Samsung SPH SP-M220 - Manual (Page 43)

Using 3-5
Video Type If the screen quality is abnormal as a result of the projector not identifying the input signal type auto-
matically in <PC> or <HDMI> mode, Video Type lets you manually set the input signal.
• In <PC> mode, the menu is only enabled for AV Timing (D-Sub) input signals. For separate H/V
sync, it is only enabled for a 1280 x 720p 59.94Hz/60Hz signal.
•
<Auto>-<RGB(PC)>-<RGB(AV)>-<YPbPr(AV)>
• In <HDMI> mode, <Video Type> is only enabled for the 640x480p 59.94Hz/60 Hz and 1280x720p
59.94Hz/60 Hz signals.
•
<Auto>-<PC>-<AV>
Caption The <Caption> function is supp orted when the external analog signal from either the Video input con-
tains subtitles.
• <Caption> : <Off>-<On>
• <Mode> : <Caption>-<Text>
• <Channel> : <1>-<2>
• <Field> : <1>-<2>
The <Caption> function will not operate in <PC> (including components) or <HDMI> mode.
Depending on the external signal, a change to the channel or <Field> settings may be required.
Each <Channel> and <Field> contains different information. <Field><2> carries additional
information to supplement information contained in <Field><1>.
(e.g. If English subtitles are provided on <Channel><1>, Spanish subtitles will be provided on
<Channel><2>.)
Reset Using this function, you can reset various settings to the factory default settings.
• <Factory Default> : Changes the settings to the factory defaults.
• <Reset Filter Time> : Resets the filter time.
MENU DESCRIPTION
RGB(PC)
Usage
Color,
Sharpness,Tint
PC menu and
zoom
When connecting the RGB output of a
PC to the D-Sub terminal
When connecting a PC to the HDMI
terminal
When connecting an AV device (STB,
DVD, etc…) to the HDMI terminal
Auto settings
When connecting the RGB output of
an AV device (STB, DVD, etc…) to the
D-Sub terminal
When connecting the YPbPr output of
an AV device (STB, DVD, etc…) to the
D-Sub terminal
RGB(AV)
YPbPr(AV)
Disabled
Disabled
Enabled
Enabled
Enabled
-
Enabled
Enabled
Disabled
Disabled
Disabled
-
PC
AV
Auto