Sherwood ST-670 - Manual (Page 34)

34
ENGLISH
SETTING THE GENERAL SETUP
1
Press the CURSOR / buttons to select the preferred item.
• Then the setting menu of the selected item is displayed.
• Depending on the countries, this DVD player conforms to either the NTSC color system for U.S.A, Canada, etc., or the PAL for
Europe, Australia, China, etc.
If the color system of this DVD player is different from that of your TV monitor and the discs to be played, the screen may be
somewhat hard to see or the picture quality may be poor.
Only in this case, change the video signal format to another.
(For details about the video signal format of your TV monitor or the discs, refer to the operating instruction of your TV or disc’s
jacket.)
• You can select the desired video signal format with pressing the PAL/NTSC button, too.
(For details, refer to “CHANGING THE VIDEO SIGNAL FORMAT” on page 32.)
When selecting the TV Type
• When you connect a normal TV with 4:3 aspect ratio to the unit, select either “(Normal/)LB” or “(Normal/)PS” and when you
connect a wide TV with 16:9 aspect ratio, select “Wide”.
When selecting the TV Display
When selecting the Angle Mark