Troubleshooting – Soleus Air MAC-8000 User Manual

Page 12

Advertising
background image

TROUBLESHOOTING

Before seeking repair or service, please check the following:


PROBLEM

POSSIBLE CAUSE

REMEDY

Is the unit plugged in?

Securely plug the power cord into the wall outlet.

Is the main power supply on?

Reestablish the main power supply.

Is the water bucket full indicator light on?

Empty the water bucket.

Unit does not operate or

only runs in fan mode.

Is the water bucket installed correctly

Completely insert water bucket

Is the air inlet or outlet blocked?

Clear the blocking.

Is there any other heat source in the room?

Move the heat source.

Are the air filters dirty?

Clean the air filters.

Is the fan speed set at low?

Increase the fan speed.

Cooling efficiency is not
satisfactory.


Is the room too large for this unit?

This unit provides spot cooling or cooling for
rooms up to 150 sq. ft. with a standard 8 ft. ceiling.

Unit is noisy or vibrates. Is the machine positioned unevenly on a level

surface?

Place the unit on a level surface.

Is the unit positioned on an uneven surface?

Place the unit on a level surface

Was the unit moved before emptying the
bucket?

Empty the water bucket before moving the unit
and keep the unit upright at all times.

Water Leaks from the
Unit.

Is the stopper on the water drain pipe loose? Make sure the stopper on the water drain is

securely in place.

Is the voltage from the power source correct? Use a proper power source.

The unit starts and stops
frequently.

Is the exhaust hose positioned incorrectly?

Position the exhaust hose correctly and keep the
exhaust hose straight as possible.


12

Advertising