Sanyo VPC-E890 - Manual (Page 32)

16 Camera Setup
Attaching the Wrist Strap
English
Camera Setup
Attaching the Wrist Strap
Follow these instructions to attach the wrist strap to your camera to facilitate easy
carrying:
1. Insert the short loop of the strap in the strap eyelet.
2. String the larger loop of the strap through the short loop and pull tight to
attach the strap to the camera.
Inserting the Battery
Follow these instructions to insert one Li-ion battery into the battery compartment.
1. Open the battery compartment on the left of the
camera.
2. Insert the battery into the compartment observing
the correct polarity. (Label side up)
3. Close the battery compartment.
Note:
Use SANYO Li-ion battery, Type NP40, 3.7V, 720mAH and the battery should be fully charged before using for the first
time.